71XS1B Carbs AirJets The air jet (air bleed) diameters for this specific "E3" carburetor. Air jets MUST be cleaned to their documented diameters.
71 BS38 ChokePlunger03 Another view of starter plunger seat. Viewed through outlet port.
71 BS38 ChokePlunger02 Starter fuel inlet, plunger seat. 44 years of corrosion.
71 BS38 ChokePlunger01 44 year old, worn, deformed, cracked starter (choke, enrichner) plunger tip. Left carb starter plungers are not available, so
71XS1B Carbs AirJets The air jet (air bleed) diameters for this specific "E3" carburetor. Air jets MUST be cleaned to their documented diameters.
71XS1B Carbs Butterfly04 The idle stop screw is a full turn from fully closed. The 1st bypass (progressive, transition) port will now be delivering
71XS1B Carbs Butterfly03 The idle stop screw is 3/4 turn from fully closed. The 1st bypass (progressive, transition) port is in play, and will be de
71XS1B Carbs Butterfly02 The idle stop screw is 1/2 turn from fully closed. The 1st bypass (progressive, transition) port edge is now in view, and w
TwoManyXS1Bs

71XS1B Carbs AirJets The air jet (air bleed) diameters for this specific "E3" carburetor. Air jets MUST be cleaned to their documented diameters.

There are no comments to display.

Media information

Album
1971 XS1B BS38 carburetor rebuild
Added by
TwoManyXS1Bs
Date added
View count
1,086
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top