geeskeet

Shifts perfectly fine in 1st, N, and 2nd with the bike off rocking the rear wheel. The shift lever also snaps back like it should.

I’ll end up opening that side again, but I did want to mention when shifting from 1st back to neutral it’ll “shift/click” up to N but...

Hey Fellas, So I’m kind of at my wits end with my ‘82. I got this bike as a basket case and have since assembled it and replaced a...

That was my plan to try and pick up some stiock ones. Thank you

Just a quick question about the point covers. I’ve installed a Boyer ignition and my bike never had these covers when I got it so my...

Best picture of my rotor I could get at the moment just got into the garage and haven’t taken anything apart. You can faintly see...

Just to update the thread I went ahead and tested the rings on the rotor, getting 2.5 ohms. So that failed. The reg/rec diodes tested...

Last night I did a little more trouble shooting and the fuse only blows when the stator/rotor is plugged in to the harness. Leading me...

I’ve dwindled it down to the reg/rec. headlight and tail light or the power box from the BB did not blow the fuse but the connection to...

I was just thinking about this option. There’s only a few things on the other side of the switch so it would easy enough to go through...

Okay fellas this is a weird one I finally got my basket case chopper up and running with the Boyer ignition (also a new stator plate...

What I meant by that last part is before I installed the Boyer (had a pamco that I let the smoke out of) the bike wouldn’t turn over...

Good morning everyone, Recently got my Boyer installed and everything went pretty well. Tried starting the bike (kickstart only...