wildbill
XS650 Enthusiast
I'm working on a basket-case build... probably not the best idea as a first effort, but if you're gonna go swimmin', might as well jump in the deep end.
I have the motor out now as the frame just got hardtailed (after a l o n g wait from Elswick). But before I pulled everything apart, the engine wouldn't fire but did kick over.
Question 1.) Is there anyone good around Greenville NC / Eastern NC that would be willing to help?
or
2.) where would be the best place to start troubleshooting?
I'm real tempted to buy a new wiring harness since the current / original one has lots of hand-done electrical tape wrap all over. Any reason not to?
I'll be posting some pix to chronicle the build in a bit ... Thanks!
I have the motor out now as the frame just got hardtailed (after a l o n g wait from Elswick). But before I pulled everything apart, the engine wouldn't fire but did kick over.
Question 1.) Is there anyone good around Greenville NC / Eastern NC that would be willing to help?
or
2.) where would be the best place to start troubleshooting?
I'm real tempted to buy a new wiring harness since the current / original one has lots of hand-done electrical tape wrap all over. Any reason not to?
I'll be posting some pix to chronicle the build in a bit ... Thanks!