bolt size and length behind oil feed tube

[jimmy5090]

can anyone help with the size and length of the two bolts that go on the engine behind the oil feed tube thanks

 

[WacoBrian]

the one that hold the cam chain guide?
you know its a 2 pc. bolt 4 all together

 

[jimmy5090]

this isnt my motor just a pic i found on here. i believe i found them on mikesxs (cylinder guide bar nut and cylinder guide bar bolt) just need the size of the bolt and length

 

[WacoBrian]

did not ask who's motor but, thanks for making that clear, tha bolt in the center is 1.0 on the threads 6 thick and 20 mm long,

 

[jimmy5090]

thanks brian i appreciate it. i wasnt trying to be a smart ass just trying to explain myself. thanks again

 

[WacoBrian]

i know im the smart asss your welcome

 

[jayel]

yes M6x20

 

[WacoBrian]

thanks for the comfirmation, ya never know i could have just picked a spare out of the bucket when i put these in, you let out the 1.0

 

[XSLeo]

The originals had a bit of a shoulder/unthreaded section just under the head, about 4 or 5 mm long. This helped center the bolts in the big chrome hollow bolts, this centered the guide in the cylinders.