Disk spacer

[TonyB]

Wanted to thank you guys for taking the time to help. I used the front hub measurements gggary posted to have these made. They work perfectly. If you want to check out a cool site, have a look at sendcutsend.com

 

[TonyB]

Wanted to thank you guys for taking the time to help. I used the front hub measurements gggary posted to have these made. They work perfectly. If you want to check out a cool site, have a look at sendcutsend.com

I had 4 cut just in case.

 

[TonyB]

So, still just a mock-up. The spacers are a 1/4" thick and leave just enough shoulder to center the rotors. I am using the 320mm disk"s" from xs650 direct . Anyone who has bought them knows they come with 1/4" spacer to move the caliper in to the center. Moving the rotors out looks much beefier.

 

[Niels B]

Haven’t followed the original thread, so asking may seem odd, is this needed when running dual disc ? Or is it all for running aftermarket brake system ?

 

[TonyB]

Haven’t followed the original thread, so asking may seem odd, is this needed when running dual disc ? Or is it all for running aftermarket brake system ?

Aftermarket disks with less dish/offset

 

[Its been a long time]

Aftermarket disks with less dish/offset

That's interesting. What modern discs fit the XS650 front hub?

 

[TonyB]

That's interesting. What modern discs fit the XS650 front hub?

 

[Its been a long time]

Are they originally for another Yamaha, or made for the XS650? I can find EBC floating discs for XS650 but they are rather expensive, more than £400 a pair and out of stock. Would be very useful to know of other modern discs that fit, even if a bit of adaptation us required.

Thanks.

 

[TonyB]

Are they originally for another Yamaha, or made for the XS650? Thanks.

They fit . They came from xs650 Direct.com . There are two 1/4" brass spacers in the package to move the caliper in toured the center. The actual disk is 5mm thick and isn't dished out nearly as much approximately 1/4" less Than the factory rotors.

 

[TonyB]

Are they originally for another Yamaha, or made for the XS650? I can find EBC floating discs for XS650 but they are rather expensive, more than £400 a pair and out of stock. Would be very useful to know of other modern discs that fit, even if a bit of adaptation us required.

Thanks.

I believe the one I have cost $125.00 each. Semi-floating. I weight them when they arrived. I think they are 3.2 pounds lighter. Don't quote me on that, It's been 6 months or so. Memories not what it was.

 

[TonyB]

I believe the one I have cost $125.00 each. Semi-floating. I weight them when they arrived. I think they are 3.2 pounds lighter. Don't quote me on that, It's been 6 months or so. Memories not what it was

Are they originally for another Yamaha, or made for the XS650? I can find EBC floating discs for XS650 but they are rather expensive, more than £400 a pair and out of stock. Would be very useful to know of other modern discs that fit, even if a bit of adaptation us required.

Thanks.

I had the site wrong, I looked back and www.yamahaxs650.com