Hey guys, im a bit a wits end.. Hours and days just trying to get the right side to fire.
79 xs, 120 psi both cyl
Valves checked
Chain tension checked
Points gapped
Carbs rebuilt and tested 3 sets which work on other bikes just fine
I have the pma on it, so i cant tell when its firing so cant time it. Might put old system back on just to check where tdc, f etc are.
But right side wont fire!!! Now heres the thing i saw on all the carbs we tried
If i cover some of the holes on the right side it fires a bit and tons of gas comes out.
If its at idle and i spray starter fluid it fires right up.
It has new everything on the carbs. All stock settings
Uni pos filters
Straight pipes out
Wtf!?
79 xs, 120 psi both cyl
Valves checked
Chain tension checked
Points gapped
Carbs rebuilt and tested 3 sets which work on other bikes just fine
I have the pma on it, so i cant tell when its firing so cant time it. Might put old system back on just to check where tdc, f etc are.
But right side wont fire!!! Now heres the thing i saw on all the carbs we tried
If i cover some of the holes on the right side it fires a bit and tons of gas comes out.
If its at idle and i spray starter fluid it fires right up.
It has new everything on the carbs. All stock settings
Uni pos filters
Straight pipes out
Wtf!?