Mikes xs green double output coil

[plane_ben]

I bought a new Pamco ignition from Mikes xs that has the double output green coil. Which terminal is the pos? I don't see any markings on the coil its' self and nothing in the installation instructions I got. Tells what wires go to pos, but not which terminal is pos. Looked through the tech posts and couldn't find any help in existing topics. Thanks for the help.

 

[yamaman]

Same same mate, just hook it up!

Some good mounting info on Petes page

 

[plane_ben]

It hit me just as I went to bed last night. They're both positive idiot! The ground is the mounting bar.

 

[retiredgentleman]

The connections for the pamco are quite simple. The green wire from the pamco goes to one terminal of the coil ( it does not matter which terminal, there is no polarity). the other terminal of the coil connects to the power feed from the kill switch. The red wire of the pamco also connects to the power feed from the kill switch.

 

[pamcopete]

plane ben,

Sorry for the confusion, Ben. Yamaman and RG are correct. The center core or mounting bar does not have an electrical connection, but it is very important that you mount it firmly to the frame for heat dissipation. There are a couple of suggested ways to mount the coil on the site, www.yamahaxs650.com

 

[plane_ben]

Thanks all.