So I am in the process of changing my rear tire. I tried to removing the exhaust on the right side. Didn't seem to give me enough room to get the axle out. Did a search saw a post indicating that if you remove the shock the swingarm would go a little lower. So I was in the process of doing just that. But my bike has some after market king/queen seat with a bracket that fastened to the shock mounting bolt. Right side came off no issue. But I needed to get the left side off to remove the bracket. Then it happened. I gave the nut a pull and it didn't really move. So I did the tighten a little and then losen trick. It started to come and then it got tough again. So I redid the process. Then I pulled. Too hard and the bolt snapped. So, what are my options?