Search results

I am in Iowa if you want to let me know the cost with shipping to 52746. Thanks

I am using a 78 motor with a pamco and wiring from scratch. I need a reg/rec and from what I see they are separate on the 78. There is a reg/rec on my 1980 that i'd like to use. I was trying to figure out if there were any issues with using the one off of the 80 and I noticed that the reg/recs...

I have seen some of the debate over PMA vs. stock charging system. Some of the guys have said that at $4 for brushes that is an easy fix so they just stick with the stock setup. I can't remember where I read that or I'd just send a PM. I have looked for the brushes and can't find anywhere close...

I don't care if it is chrome, in fact i would prefer it not to be. Doesn't have to be perfect. Let me know if you have got one. James

Got 2 broken ones that I'd like to replace. They are rusty so I am hoping I can find someone with a couple ugly ones they'd sell cheap.

These are a killer looking bucket and I am waiting to hear back from the seller to try and figure out if I can use a standard halogen bulb instead of the 20w 12v bulbs that they sell separately. It is difficult to tell by looking at the pictures of the 12v bulbs that they sell whether a halogen...

Looking for an old headlight with the speedo in it and I am finding several brands and styles. Are all speedo cables the same (universal) or does it vary from make to make?

Don't wanna buy a whole set and I was hoping to find someone who bought a set of Powell Peralta wheels and bearings who would sell one of the three that he has leftover.

I have been looking around the wiring threads and I have found what I need for a complete wiring diagram for my end setup, Pamco, PMA, cap, condenser and no battery. I would like to just get it running and timed and work out from there. In the Banshee swap thread there is mention of wiring just...

SOLD I got a girder front end I'd like to trade for one of lowbrows deep tunnel wassell style peanut tanks. Decided to go a different direction with the build. I stuck it in an extra frame to see how it fits and it has just a hair of play. It looks to measure about 15/16" on the neck and...

I had a local bike fab guy do the tail on my bike and when I got it back the lower motor mount is not at 7" it is a hair over 6 3/4. I don't wanna mess with driving an hour back out to his shop to have him fix it so I am wondering if there is any reason why it would be a problem to grab a...

I am in St Louis for the weekend so I thought I'd stop by Archway International Motorcycle Salvage. I wasn't impressed. There is a very small area that you can browse where the parts are overpriced. Upstairs where the good stuff apparently is you can't walk around. You ask for something specific...

Would someone be willing to tell me what the measurement is one their TC Bros tail, or something else pretty standard, between the back of the vertical part of the backbone and the cross member where you set your seat springs? Thanks.

I want to lace my hubs to 21" excel rims on the front and rear. Trouble is, at 1.6" width it looks like the widest tire I can run is an 80 which is 3" wide if I am not mistaken. I really like this look but I don't want to make a death rocket out of this thing just to get a desired look. What...

I found this guy on ebay and he is selling complete sets front and back for about $90 shipped. I want to lace up my front and back to 21's and he said he can do custom lengths. Wondering if anyone has ever bought from him. I know buchanans are the best and I am still waiting to hear back from...

Let me know if you got one you are willing to part with

Title says it all. I am looking for an 18" rear and I have a 16" to trade.

I have read every post on the site with "Rake" in the title but there are not a lot of pics in one place that show the different rake options in picture form. Post your bike and the amount of additional rake over stock 27 degrees. Also, it would be great if you could add whether you made...

I sent some things out today to a few guys on the site. It was my own fault and I chalk it up to a lesson learned because I haven't done much shipping until now. I packaged everything and planned to take the the post office. I was by the UPS store and short on time so I sent through them. When...

I would like to fab a chain tensioner that is spring loaded, similar to the monstarcraftsman version and I am wondering if anyone knows where to look for the sprocket and spring. I work in a steel mill and I can have pretty much anything machined as far as brackets are concerned. I can get...