Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Enjoy XS650.com?Consider making a donation to help support the site. XS650.com receives a small share of sales from some links on this page, but direct donations have a much greater impact on keeping this site going.
Up at the top of the page, click XS650 TECH. This leads you to a list of threads. Scroll down to the Electrical section, click on "A Few Wiring Diagrams" Look through them, find one that has all the parts you have and wire accrodingly.
I like this one. It has a basic points set up but has blocks with the later TCI and combo reg/rec that you just swap around.
Leo
Hello everyone, does anybody know if the brake pedal pivot that goes through the frame is the same for disc, and drum or are there two different ones ?
The outer pedals are the same, the pivots are different. The disc brake pivot is turned so the motion points 'up' and the hole for the pin is in a different spot, the leverage is different. It's possible to cut off and redrill a drum brake pivot to work with a disc brake master cylinder, but the return spring and pedal height stop brackets have to be moved as well.