review too please Meddy of your ebike, besides pics...
A few pics for you Moabite and a basic review.
Fitting the kit is reasonably straightforward although I guess each bike would have it's differences.
I had to shave some material off the inside of the forks to allow clearance for the larger outside diameter of the hub motor after that the wheel justs slotted straight in.
Left side crank had to be removed to fit the pedal assist sensor, luckily I had a crank puller, also has a thumb throttle mounted on the handlebar but not something I use much I prefer to pedal.
The battery and holder fitted on to the drink bottle mount on the downtube, the box with the motor controller and all the wiring plugs fitted nicely onto the seat stay held with a couple of plastic clamps but I also added some extra zip ties too.
The kit came with new brake levers with motor cutout sensors in them but as my bike has the gear shifters built in to the brake levers I have not used them, motor still cuts out when I stop pedaling it just has a small amount of lag time couple of seconds maybe.
LCD screen shows power assist level 1-5, battery level, speed and distance traveled.
Wiring up was easy enough, just had to take some care with where to route the wires, zip ties helped heaps.
Riding is fun, I love it, like riding with the wind behind you all the time, I've only been using it on level 2 or 3 so far and I can ride comfortably along at around 20-25kmh, I haven't been on any dirt roads or tracks yet till I get some better tyres. Not sure what the range is most I've done in one go so far is 12 K's and all 5 bars were still showing, still trying to harden up my backside after not riding for so long.
The XR looks good, your getting stuck into it I see.