Use a cutoff disk or bandsaw to cut the lines.
If you plan on retaining the factory spacers and adjusters, the extended axle plate must be centered in the original axle slot. You can achieve this b
Using the new axle plate as a guide, cut the tips off the end of the swingarm.
Grind the axle slot smooth.
Use a cutoff disk or bandsaw to cut the lines.
On later-model swingarms, the axle slot must be extended to the rear of the swingarm. First mark two straight lines from the slot the the back of the
First prep the surfaces to be welded. Make sure they are free of rust, oil, dirt and paint.
First prep the surfaces to be welded. Make sure they are free of rust, oil, dirt and paint.
Ranger

Use a cutoff disk or bandsaw to cut the lines.

There are no comments to display.

Media information

Album
Swingarm extension
Added by
Ranger
Date added
View count
539
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top