Omar's rear wheel conversion kit

M

mwabes

XS650 Street Tracker
Messages
32
Reaction score
0
Points
6
Location
Southwest Michigan
I am thinking of using one of Omar's rear wheel conversion kits to mount a 19" mag wheel on the rear of the street tracker I am planning on building. Does anyone out there have the installation instructions they could reply or PM me? I would like to look them over to determine if that is the route to take. Thank you very much.
 
The owner of Omar's was just sitting here with me in the shop. :thumbsup:

I have a set of the directions, what do you need to know? I'm not gonna publish them without his permission of course
 
What is it you want to know? There are 2 large spacers. One thinner one on the disc side, and a thicker one on the gear side. 3 bearings that match the wheel id and and the axle od. 3 other spacers to do the job.
 
I have that kit as well it's worth the $ just to bolt it on and be done with it. Only negative with it is no dust seals. It dose come with sealed bearings though.
 
Punkskalar said:
The owner of Omar's was just sitting here with me in the shop. :thumbsup:

I have a set of the directions, what do you need to know? I'm not gonna publish them without his permission of course
Click to expand...

Thank you for responding. I just wanted to see how it all went together before purchasing the kit. I guess I should not have asked for the instructions to be published, sorry wasn't thinking. Thanks
 
RFLIVES said:
Tell robert to get back to work!
Click to expand...

I mostly tell him "this round is on you" :laugh:

It is a pretty simple kit, bolt on and go... I have 2 of them here in the shop right now, and I know for a fact I'm using one of them on my Digger project. The Street Tracker may go a different direction, as I'm being kinda lazy with that one...

Hugh
 
No photos yet. I am just getting started, all I have is a complete 1979 motor and a pair of 19" XS650 mag wheels, that is why I was asking about the wheel conversion kit. I am planning on using Omar's Items to complete the project. I have a very long way to go. My next purchase is going to be a frame, hopefully I can find a titled one.
 
Don't know how far you are willing to go or how much you have to spend, but there is a 79 special in Cadillac with title for $600.
 
Thanks I believe if I am not mistaken I seen that one on craigslist. I have been thinking that might be the best route for me to take rather than trying to build a tracker from scratch. I will look into it, do you have the info on that bike in case it's a different bike than the one I am thinking of. Thanks
 

Similar threads

S
Adapting a 19 inch Morris Mag 7 spoke wheel to a 78 XS special 650 with disc brakes
Replies
4
Views
306
Superdriver
S
Flash1977
19" front mag wheel on the rear ? Kit?
Replies
0
Views
145
Flash1977
Flash1977
JonW
18" Mag Rear Wheel Options for XS650 - Shaft Drive Wheels in Particular
2
Replies
20
Views
3K
azman857
azman857
S
rear brake conversion
2
Replies
23
Views
1K
46th Georgia
4
S
x650 Storm Conversion Kit.
Replies
3
Views
689
LTGTR
L
Back
Top