Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Enjoy XS650.com?Consider making a donation to help support the site. XS650.com receives a small share of sales from some links on this page, but direct donations have a much greater impact on keeping this site going.
In the "Ron Wood BMW" thread there was a comment regarding intake length. I believe I have posted on that subject before, but anyway. So here goes:
On a stock framed XS650, with any linked carbs, like the stock BS 34 and 38, Mikuni RS34, Keihin CR/FCR, and the popular Kawasaki 500 flatslide CV...
I have been fiddling with various air filter/ stack arrangements for my 77, with TM/RS34 carbs. Both for looks, and hopefully to gain a little bit of hp as well.
My last setup is a pair of Mikuni velocity stacks, 70 mm long, and with a nice, large radius that gives a 3"/ 76 mm OD. In order to...
Hi to all members of this forum. I represent motorcycle startup MessnerMoto.
MessnerMoto is focused on designing unique parts for Cafe Racers.
There are many more products at www.messnermoto.com/store
If you have questions or you need something special for your project please don't hesitate to...
Slowly working on assembling this project and got reminded that there were no filters in the air boxes. Checked and find that the filters from the 1981 and 1982 will not work in this bike.
Went online to see where they are available and was somewhat surprised at the prices. I was thinking...
Hi has anyone out there fitted these to stock CV carbs
They are 52mm ID I have BS34 carbs and want to do away with my tired airboxes
All the best Funky
Hey ya'll.
I'm going to be putting pod filters on my '79 XS and i'm wondering which you all like? I like the look of the K&N's but i want to know which is working best with your bike. I know i will have to finagle with the carbs but looking to do that as little as possible. Will also will...
Just a quick question, I've read another thread where pamcopete demonstrated a home built air filter made from one half of a briggs and stratton filter. 1) Has anyone else tried this? Do they work well? Same thread mentioned that K&N filters do not work well on the 34M carbs, has anyone had...
I would like to switch from my K&N filters to the Uni Pod units. Can someone tell me what I will need to be doing with the carb changes when I do this. When I went to the K&N a few years ago I changed the Main but cannot remember to what over stock and I lowered the clip on the needle to the 4th...
I have a 72 XS2. It is all stock with a couple of small exceptions. I changed out the paper filters and put in 2 K&N elements. Bought them from K&N. I added on billet air intake extensions so it would move the filters back about 3/4 of an inch and the side covers would fit on normally.
An...
Anyone willing to share some ideas of some unique air filters? I'm hunting for some ideas. right now I have a K&N cone filter but am not sure how I should mount and if I'm going to build a manifold to connect the two Carbs to on filter.
Has anybody modified the stock air boxes to get more air flowing? Mine just have some holes in the back to let the air in(77), seems pretty restrictive.