The 76 caliper mounts behind the fork leg. The 75 and earlier calipers mount in front of the fork leg. Otherwise almost identical, and the calipers can be interchanged.
I do have the steel pipe.Do you have the front brake hose and pipe from the master to the caliper(in good condition) Please let me know if you do and how much. thx don
I used one of these from Niche Cycle and it worked.I have bought the steel brake line from Mike. It's no go. Too short. The rubber lines are OK.
I believe this will work. That's Yamaha's part number.
View attachment 258367
http://www.nichecycle.com/ncs/categories/brakes/brake-lines-fittings/yamaha-brake-pipe.html
Hey there,I bought the XS2 parts cache in this thread:
https://www.xs650.com/threads/sold-parting-out-72-xs650-to-build-a-chopper.64830/
Parting out complete bike minus frame, engine, and motor mounts.
All parts are better than what you usually see, and many are nice or very nice.
I paid a premium for this cache, so I'm not going to give these parts away, but I'll beat eBay prices for comparable quality.
SPECIAL -- I have too many XS2 front wheels and associated parts such as axle, rotor, spacer, speedo drive, and will make you a very good deal on these parts.
Pics are from the above link. Better pics on request.
View attachment 250536View attachment 250537View attachment 250538View attachment 250539View attachment 250540View attachment 250541View attachment 250542View attachment 250543View attachment 250544View attachment 250545View attachment 250546View attachment 250547View attachment 250548View attachment 250549View attachment 250551View attachment 250552View attachment 250553View attachment 250554View attachment 250555View attachment 250556View attachment 250557View attachment 250558
They now live at my house with new filters. I just put them on my bike about 30 minutes ago. Now I can get rid of the pods. I'm trying to figure out why I'm really low on power below 3,500 rpm.Below is the air box differences. There are two 71 boxes on eBay. They sold already.
Sending you a PM.........Can you help with any of these?
Wanted XS650 Front End 35MM fork tubes
- Forks complete with lower legs
- Front Wheel Hub prefer drum brake if fork tubes are 35mm
If I need to go hydraulic to get 35 mm forks
- Caliper
- Master cylinder
- Rotor