rem61
XS650 Enthusiast
Hello xs Comrades,
I'm rebuilding my engine and have installed the transmission back into the upper case. Both trani pieces were taken apart cleaned and reassembled, adding a new fifth gear from Mikes. When I go through the shifting sequence from first to fifth and back, sometimes the gears hang up. The "dogs" if that's the correct terminology will occasionally hang up on the mating gears. Looking at some YouTube videos, this doesn't happen with some good videos I've seen. Any help would be appreciated as I certainly don't want to seal the cases then discover an issue later. See attached photo of my trani.
I'm rebuilding my engine and have installed the transmission back into the upper case. Both trani pieces were taken apart cleaned and reassembled, adding a new fifth gear from Mikes. When I go through the shifting sequence from first to fifth and back, sometimes the gears hang up. The "dogs" if that's the correct terminology will occasionally hang up on the mating gears. Looking at some YouTube videos, this doesn't happen with some good videos I've seen. Any help would be appreciated as I certainly don't want to seal the cases then discover an issue later. See attached photo of my trani.