peterg
XS650 Addict
I have a Boyer Bransden Micro Power Kit on order and am exploring my wiring options. Boyer recommended "a 1 ohm/25 watt ballast resistor mounted on an aluminum plate and in series with the micro-coil feed to reduce coil heating when hot weather town idling". The bike has an M-unit which is reliable in providing consistent voltage. I have the option of providing power from the battery via the key switch to the coil and providing power from the m-unit via the kill switch to the Boyer box or providing power to the coil and box via the kill switch.
Below are diagrams showing my options as well as the bike's current wiring diagram. Any concerns with either option?
Below are diagrams showing my options as well as the bike's current wiring diagram. Any concerns with either option?