hjpaul7
XS650 Enthusiast
So I was syncing my carbs and in the middle of it the bike died, I ran out of gas. Filled it up and it won't start. I did notice the can chain adjustment acorn but was left off when I put the carbs back on and the threads were sticking way out. Put the but back on and still can't start it. Now it won't kick at all either. It just kicks back or doesn't budge. I tried to turn the rotor to check the cam but now the rotor but just losens off.
Tips?
Before I screwed up I:
Replaced plugs, wires, condesnor, points, coils. Can chain adjustment, valves, ignition timing and cleaned carbs.
Tips?
Before I screwed up I:
Replaced plugs, wires, condesnor, points, coils. Can chain adjustment, valves, ignition timing and cleaned carbs.
Last edited: