5Twins got the seals and screws Yesterday you are the bomb! I had the shaft out of a 34 so tried them on it they fit great but it looked like there was room for two in the recess so I put in 2 on both sides seems to work great on the 34 that way Don't know if there is room for two on each side on the 38s but I guess I will find out soon.
Now the $64,000 question; how do you get the throttle plates back in and tight and not have them bind!
While searching to find this thread I found an old thread from 650rider and sure enough XSJohn pops up and says "5twins sent me some seals he got from Mcmaster Carr....that's all I know about them....maybe you could chase him on 650 Garage...running them now and they seem to work.......see if you can double the seals if there is room.....like I said on another post 2 would be better than one.....just getting into this idea and on the left on my Bs34's 2 will fit and work......"
That is too spooky. John you are the man!
Now the $64,000 question; how do you get the throttle plates back in and tight and not have them bind!
While searching to find this thread I found an old thread from 650rider and sure enough XSJohn pops up and says "5twins sent me some seals he got from Mcmaster Carr....that's all I know about them....maybe you could chase him on 650 Garage...running them now and they seem to work.......see if you can double the seals if there is room.....like I said on another post 2 would be better than one.....just getting into this idea and on the left on my Bs34's 2 will fit and work......"
That is too spooky. John you are the man!
Last edited: