slister21
XS650 Enthusiast
Hey Guys, I built a custom frame for an xs project this spring and I am running a 16" Harley spoke rear rim. The engine is centered in the frame and when I mounted the rear wheel and chain I noticed the clearance to the tire was less than a 1/16th of an inch. The original Harley sprocket had a 1/4" offset to it. I have the Mr. Lucky's 32 tooth sprocket for this rim. Would it be possible to space the sprocket over 1/4" inch and then center the wheel with the appropriate spacers or do I need a different wheel?
Thanks
Scott
Thanks
Scott