Giveaway from MikesXS: XSCharge Permanent Magnet Alternator Kit (ends 11:59pm EST on March 1, 2017)

Giveaway from MikesXS: XSCharge Permanent Magnet Alternator Kit (ends 11:59pm EST on March 1, 2017)

View attachment 94393

MikesXS is giving away an XSCharge Permanent Magnet Alternator Kit (PMA) with 200 Watt stator to one lucky member! Specifically built for the XS650. The kit replaces your old rotor that has failed or magnet that has weakened over time. Replaces regulator/rectifier with solid state electronics. Fits 1970-1979 XS650 with OEM points ignition (or cam timed ignition systems). Will also fit 1980-1984 models running aftermarket cam timed ignition systems.

To register, post a photo of your XS650 in this thread. The giveaway ends at 11:59pm EST on March 1, 2017. Existing Members Only!
You need to have been a registered member before the date and time of this post to be eligible (this will be verified). All entries from members who joined after this post will be ignored. If you are new to the site, register today to be eligible for future member-only drawings on XS650.com.

One entry per person (only the first post by each person in the thread will count). You must post before 11:59pm EST on 3/1/17 to qualify. The winner will be chosen randomly from the qualified entries. Shipping will be covered by MikesXS worldwide.

XSCharge Permanent Magnet Alternator Kit (PMA) 200 Watt - $297.92 value
For complete details or to view installation instructions visit www.mikesxs.net
 

Attachments

  • image.png
    image.png
    1.1 MB · Views: 394
Got this diamond in the rough in a crate, slowly putting her back together. I'm in
 

Attachments

  • IMG_2541.JPG
    IMG_2541.JPG
    160.4 KB · Views: 396
And the winner is.....

truckman682002, post 225. Congratulations! I'll send you a message to get your contact information.

Thank you to everyone for playing along and thanks to MikeXS for the giveaway!

Check back soon as I'll be posting another giveaway shortly.


Dang! I was hoping to win so that I'd have a charging system to go with my snazzy new MAC Performance exhaust system!!!

Anyhow - congratulations truckman!!!

Pete
 
Last edited:
I won the pma!Thank you xs650.com and Mike's xs.Hope my bike turns out half as nice as the bikes pictured in this thread.Now I just need some warm weather so I can get my bike done.Thanks again to xs650.com and Mike's xs.
 
Everyone starts somewhere! Good Luck on your build Truck! Plenty of help here to get you through the tuff spots! Nice to have the notoriety of the public when winning the prize! All good!
 
Back
Top