bdholsin
XS Enthusiast
My rotor puller arrived today. I'm not 100% certain how this is supposed to come off now. If you look at my picture below I have labeled the items as follows:
Rotor
rotor puller (1) - for the large "socket" that threads on
rotor puller (2) - the threaded insert to the "socket"
I see that a 1" wrench will fit on the "socket". Do I just use the 1" wrench on the "socket" and an impact gun with a 17mm socket and keep torquing the rotor puller (2) in the clockwise direction?
Also, do I need to remove the 17mm nut before removing the rotor? It doesn't look like I need to but just wanted to verify. Thanks!
Rotor
rotor puller (1) - for the large "socket" that threads on
rotor puller (2) - the threaded insert to the "socket"
I see that a 1" wrench will fit on the "socket". Do I just use the 1" wrench on the "socket" and an impact gun with a 17mm socket and keep torquing the rotor puller (2) in the clockwise direction?
Also, do I need to remove the 17mm nut before removing the rotor? It doesn't look like I need to but just wanted to verify. Thanks!