xlr8tn
XS650 Enthusiast
I bought one of those 7" replacement headlights that has high, low, and running lights. Did some testing and it seems like the brown/black controls the running light. The white / blue control the hi/low and green to ground. But how am I supposed to wire this up as there was no diagram included with the light. Also, I am re-using controls from an old R6 that has low/high...no on/off switch. Can I wire one of the brown wire from my key switch and rely on the 25amp main fuse?
Do I wire to low always (don't care about driving light) ... this will match low beam on the switch. When I flip the hi beam on...do I just send signal to other wire? Or is it one or the other? Test showed brighter with power to blue and lighter to white.
Please advise. Last piece of the wiring for me.
Thanks,
Brent
Do I wire to low always (don't care about driving light) ... this will match low beam on the switch. When I flip the hi beam on...do I just send signal to other wire? Or is it one or the other? Test showed brighter with power to blue and lighter to white.
Please advise. Last piece of the wiring for me.
Thanks,
Brent