Help identify parts still in packages with #’s

[vansmetal]

I’ve searched all around, maybe someone will know. They where all in the same box and no other labels. Any help greatly appreciated!

 

[jpdevol]

Possibly various and sundry AllBalls Racing suspension stuff (fork parts, swingarm parts, etc) - guessing

 

[jetmechmarty]

If you have anything to ID the vendor that would help.

 

[vansmetal]

Possibly various and sundry AllBalls Racing suspension stuff (fork parts, swingarm parts, etc) - guessing

I just looked up the numbers and can’t compare to any pics but those numbers definitely come up to the allballs racing website.

 

[jetmechmarty]

I just looked up the numbers and can’t compare to any pics but those numbers definitely come up to the allballs racing website.

That sounds like a winner!

 

[vansmetal]

That sounds like a winner!

Definitely agree…which I’m going to hardtail…so they’ll be put to the side. Thanks all!

 

[vansmetal]

Help again identifying parts in hand? I originally thought this was part of the starting motor unit since it was next to the idler gears in 2nd pic…was thinking maybe previous owner was going to replace absorbers but from what I could find those aren’t the absorbers…

 

[arcticXS]

First pic looks like 4 valve seals and 4 copper washers for the cylinder head nuts. And most likely a bushing for the clutch pushrod in the gearbox shaft. The large seal or whatever, I have no idea.

 

[jpdevol]

The large rubber ring might be a seal for the steering stem (#1)

 

[Mailman]

Your gear is part of the starter assembly, you can see how it is placed in this photo album,

https://www.xs650.com/media/albums/electric-starter-assembly.3074/

Edit: I don’t think you were asking about the gear were you.

 

[vansmetal]

OV 49 39 5

If this helps

 

[vansmetal]

The large rubber ring might be a seal for the steering stem (#1)
View attachment 236314

I was able to find a close up diagram and you are right…it is the steering neck dust seal. Thanks

 

[vansmetal]

Your gear is part of the starter assembly, you can see how it is placed in this photo album,

https://www.xs650.com/media/albums/electric-starter-assembly.3074/

Edit: I don’t think you were asking about the gear were you.

Correct…I was just saying that what was in my hand was next to the gear. I did make it a little confusing

 

[vansmetal]

First pic looks like 4 valve seals and 4 copper washers for the cylinder head nuts. And most likely a bushing for the clutch pushrod in the gearbox shaft. The large seal or whatever, I have no idea.

I was able to double check all, other than washers…you are right on the money…thanks!