1lowdiesel
XS650 Enthusiast
First off I do have a clean and clear title for it. The neck is the only orig part still on the bike. The rest I built. Everything was built off a jig so it is true and straight. Tubing is 1.25 x .125 DOM and was all rolled on a tubing roller.
Harley springer front end, XS650 engine with upgraded timing, ignition and charging system. Engine was sandblasted and is ready for paint. Engine ran great before removing from donor bike. Custom 2 into 1 Harley carb set up. All motor mounts are finished and engine can be bolted in.
So I started building this a few years ago and have really just lost interest. It's now a "basket case" because the bike will come with a tote full of brand new parts for the bike.
Needs brakes, bars, wiring, seat, tank, misc bolts, front axle and time to be completed.
There is well over what I'm asking invested but obviously you'll never get what you put into it so I'm open to offers in cash or trades or both. $1500 obo
Located in Morgantown Indiana
Any questions please ask.
I can't get pics to upload but can email or text them
609-235-6415
Thanks
Kyle
Harley springer front end, XS650 engine with upgraded timing, ignition and charging system. Engine was sandblasted and is ready for paint. Engine ran great before removing from donor bike. Custom 2 into 1 Harley carb set up. All motor mounts are finished and engine can be bolted in.
So I started building this a few years ago and have really just lost interest. It's now a "basket case" because the bike will come with a tote full of brand new parts for the bike.
Needs brakes, bars, wiring, seat, tank, misc bolts, front axle and time to be completed.
There is well over what I'm asking invested but obviously you'll never get what you put into it so I'm open to offers in cash or trades or both. $1500 obo
Located in Morgantown Indiana
Any questions please ask.
I can't get pics to upload but can email or text them
609-235-6415
Thanks
Kyle
Last edited: