Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Enjoy XS650.com?Consider making a donation to help support the site. XS650.com receives a small share of sales from some links on this page, but direct donations have a much greater impact on keeping this site going.
I’m sure this topic has been destroyed over time but I’m having the hardest time figuring out how to wire an led brake/tail light with this dinky little brake switch from tc bros.
The brake switch is in series with a positive lead to the tailight ; so power in to one screw on switch and power out from the other screw, then on to tailight. (If using a Motogadget M-Unit it's different)
The brake switch is in series with a positive lead to the tailight ; so power in to one screw on switch and power out from the other screw, then on to tailight. (If using a Motogadget M-Unit it's different) View attachment 240208
One wire will be a running light that carries power when lights are switched on (taillight), one will be switched power from the brake switch (brake light) and one will be ground. You can test which is which on the battery - guess: black = ground, blue = taillight, red = brake light
One wire will be a running light that carries power when lights are switched on (taillight), one will be switched power from the brake switch (brake light) and one will be ground. You can test which is which on the battery - guess: black = ground, blue = taillight, red = brake light