Search results

So been riding and building on and off for about 2 years now on this bike, thought it was about time to finish. The frame sandblasted. Some new rims and spokes from mikes. Mockup with painted frame, new wheels, tank and seat. The brembo kit from Pandemonium, funny thing was aparently...

Hi all Installing the pandemonium brembo kit bought the 35mm kit, my problem is i can't fit the 298 mm rotor, the one I have is 267 mm, when I tjek other fork legs it looks like my brake ears are located further down. So question is what's this fork, it looks like other forks I have seen except...

Hi all, gonna need some advice on this cam, its like the pin hole is cracked, tried to put a pin in it and it can move to the side because of the cracks, its from an engine i bought and wanted to put a big bore kit on. Is there any way to use this cam or is it to far gone. Thought about...

Hi hope you wonderful people will take the time to help me out here cause i am puzzled. I have the mikes pma kit and when i measure the output voltage at idle its 14,5 but when reving it drops to between 3 and 7 volts ???? Setup. the bike is running on a seperate battery and i am measuring...

Just wanted to share, harley supertrapps with no baffles sweet sound but to loud for me. Best regards from Denmark.

Hi all So iam running a 76 with pamco and pma (mikes pma) and have had so much trouble with the pma system not performing (over and undercharging) so decided to try something new while deciding how much money to throw into this again. Here goes, my bike is kick only with no blinkers and a led...

So this is actually a post for Pete, since he is not replying to mail or pm, ill post it here. So pete dont know if u read any of the mails or pms from me or xsleo but its been 3 weeks without a single peeb from you, xsleo has been super helpful (as always) but when he cant get a hold of you...

Hi All Bought new brake pads for my 76 dual brake setup, but when i put one brake pad in the other wont fit, the caliber pistons seems fully retracted. am i missing the point here or what, i have searched the forum, but no one seem to have had the same problem. I have tried two different...

Hi all I am thinking of rebuilding my engine and considering the cost of man hours here in denmark for a cylinder honning i am looking at the big fin cylinder kit from both mikes and heiden they seem to differ in engine fit as mikes states its for the 447 and the heiden is for 533 my engine...

Hi need some advice on this. So fitted my new pamco with e-advancer took it for a spin and let me tell you, i smiled all the way it had a small hesitating on the midrange but ran perfect so went back and upped the pilot jet one size, and off i went again on my (brand new xs650). Still some...

Hi just bought two capacitors for my pma setup, they just arrived and let me tell you they look a little small, is there any diffence in what kind of capacitor u chose ( are there different types) or am i overthinking this, the sparx cap looks massive compared to this one. Best ragards Denmark

So noticed on my last ride a tiking sound from the engine, when i got back i started locating the sound and found that one of my rocker arms are not tight on rotating the engine, meaning its tight when compresing the valve spring but there is slack when not compressing. Hope i explained it...

My clutch is sliping so putting in new plates, so taking of the cover this is what i see, i am just wondering if it is normal with all this Black Stuff on the surface, when looking at the pictures in here everything looks so shiny. Havent done very much engine work so dont know what to expect...

Hi all I need some advice on which clutch plates and springs to chose, been looking at mikes they have a complete set but are there better alternatives outthere. Best regards.

Well finally finishing my tank, airbrushed the font last night, just gave it last layer of varnish today and its in the oven now, cant wait to see it done. Have a nice weekend all. best regards from denmark -1 °C

Hi am hoping for a little help I am helping my brotherinlaw with his xs1 and we have put on a new front fork, a 35mm think it was used from 77-83, problem is he still has the original wheel and we cant get the disc to line up with the caliber. He bought the new caliber fitting the 35mm fork...

Hi All I recently joined this forum when i started an xs 650 project, just thought i would say hi since we are going to spend a fair amount of time together. My previous project was a xs 400 se 81. Best regards from Denmark