zoomoto
Blinker fluid low
hey fam!
I’m posting a video of how my bike is currently running. I know these bike are notorious for being noisy but I feel like mine has gradually gotten louder over the last 500 miles I put down since buying the bike.
Like I mentioned, 1977 XS650D. Just adjusted cam chain tension flush with adjuster at full extension when warm (I may readjust), cold set intake valves to .002 (going to reset to .003 probably after more research) and exhaust are set to .006 per my Clymer Manual. I just did an oil change as well.
Oil level was a little low and I noticed a carb boot leak. So i took off the airbox, carbs, and boots. I cleaned everything, set cam chain tension, set valve clearance, changed oil, etc.
Any input would be incredibly valuable and I’m happy to provide any additional information. I just wanna ride out the rest of the season before it ends! Thanks!
I’m posting a video of how my bike is currently running. I know these bike are notorious for being noisy but I feel like mine has gradually gotten louder over the last 500 miles I put down since buying the bike.
Like I mentioned, 1977 XS650D. Just adjusted cam chain tension flush with adjuster at full extension when warm (I may readjust), cold set intake valves to .002 (going to reset to .003 probably after more research) and exhaust are set to .006 per my Clymer Manual. I just did an oil change as well.
Oil level was a little low and I noticed a carb boot leak. So i took off the airbox, carbs, and boots. I cleaned everything, set cam chain tension, set valve clearance, changed oil, etc.
Any input would be incredibly valuable and I’m happy to provide any additional information. I just wanna ride out the rest of the season before it ends! Thanks!