jgimar
XS650 Addict
Need some help. I have recently rebuilt my old 77 650D, and will now run a two into one carb setup. I am using a Mikuni 38mm round slide jetted as follows(from a previous recommendation). Main jet 330, Pilot jet 30, Needle jet Q2, Throttle valve 2.5, Jet needle 6DP1, and Air jet 0.5.
I am experiencing a loading up problem, happening mostly upon acceleration thru the gears. When I accelerate for example from 1st to 2nd, etc. , when you reach that point to shift, it's spattering and sputtering like it's loading up. Pulled the air filter and I have quite a bit of gas slopping around. Tried one old remedy of dropping the needle all the way but still lots of gas and still loading up.
Anyone a pro on these round slides that can give me some hints? All help appreciated
I am experiencing a loading up problem, happening mostly upon acceleration thru the gears. When I accelerate for example from 1st to 2nd, etc. , when you reach that point to shift, it's spattering and sputtering like it's loading up. Pulled the air filter and I have quite a bit of gas slopping around. Tried one old remedy of dropping the needle all the way but still lots of gas and still loading up.
Anyone a pro on these round slides that can give me some hints? All help appreciated