I recently purchased a PMA from Hughshandbuilt for my 1980 xs650. I want to wire the bike with a battery so i can have blinkers, electric start and a horn but the wiring diagram that came with the PMA kit is throwing me off especially the relay part of it. In the diagram the orange wire goes to the positive side of the coil. The black wire is split with an o ring terminal which i assume gets grounded and then connected to the negative side of the coil. But my kit has a solid white wire with bullet connector and in the diagram there’s a red/white that goes to the positive side of the key switch. I contacted huge and he said 85 goes to the positive key switch but 85 on my relay has a black wire coming from it. The colors from the relay from the kit don t match the colors from the wiring diagram he uses. Can anyone help me please. Also I dont want to run a kill switch. I want the coil to energized from the fuse box which is turn on by my key switch. Some one help me please so i can finish this bike. Also if anyone has a wiring diagram with no kill switch and 4 blade fuse box with only a key please send it to me. Thanks in advance