radian front end

[sportyrider]

I have a chance to pick up a Radian frame locally, cheap. I know the story on Radian swingarms, has anyone used a Radian front end on their XS650? With the built in fork brace, larger diameter and dual disks (that weigh much less than the ones on an XS) I was wondering if anybody had experience with this swap.

 

[gggGary]

You will be using the radian wheel, if you like that..... I don't know anything about how the neck will fit up.

 

[sportyrider]

I thought of using a xs650 front hub and a 2.75x16 rear rim so I could run the stock size Radian tire. I have access to a lathe to make spacers if needed.

 

[XSLeo]

Spacers may not be the problem. Stem length may be shorter on the radian. Axle diameters may be different.
But I might try it. I tried an 82 Seca 650 Forks on my 75. Air forks, dual brakes. But had different axle size so had to run the Seca wheel. Any way I did like it much.
I now have a front end built from 79-82 parts on it now with a few mods and am very happy with it.
Leo

 

[5twins]

Yes, I feel the 35mm forks can be made to work very well, so can the stock brake. I'm very happy with mine.