REPETE
XS650 Addict
Please describe for us your bowl venting...
Good Morning!
2M, I'm hoping I can describe sufficiently.
The air vent passage is definitely clear. I've blown carb cleaner and air through it and witnessed the exiting. In addition, when I've removed the carb and turn upside down and then back upright gas will flow out of it. When installed, I've run the motor both without a vent rubber tube and now with a vent tube in place. There are no kinks in the vent tube and it's presence or lack of has made no difference. If I missed a key piece please let me know and I'll execute your thought.
sidenote: I see you're in Fredericksburg. My brother lives in Houston (formerly lived in Katy), Mother lived in Katy, daughter in San Antonio and this XS was "imported" to here in FL from Waco
Last night's homework assignment completed:
- check pilot & main jet orifices... brass jets present & clean
- examine mix screw(s)... both good to naked eye note: I failed to bring to work to examine the fine tips under my scope. I'll followup on this.
- compression check... right cylinder (the one in question) @ 155psi left cylinder (no operating issues) @ 125psi
Pete