Orion61
XS650 Addict
Hi all, I have gone through the search and havent really gotten all my answers. I have had great support from you with all my needs so far in getting my 75B going after sitting for nearly 13 years.
What do I need to do to change the gasket for the cam chain tensioner? Can I do it in the frame? I have a pretty good oil leak that is either coming from the bottom of the tensioner cover OR the bottom of the jug.
It used to have a seeping oil leak on the bottom of the left cyl at the base that would drip onto the shifter but that isn't leaking now. It never was bad just a couple drips in 50 miles, but now idling for 20 min and there is an ounce of oil on the floor.
I presume I need to pull the carbs again No big deal, I have one needle valve leaking and over filling the carb anyway if it is sitting and not running, there are the 6 bolts, THEN WHAT?...
Thanks
What do I need to do to change the gasket for the cam chain tensioner? Can I do it in the frame? I have a pretty good oil leak that is either coming from the bottom of the tensioner cover OR the bottom of the jug.
It used to have a seeping oil leak on the bottom of the left cyl at the base that would drip onto the shifter but that isn't leaking now. It never was bad just a couple drips in 50 miles, but now idling for 20 min and there is an ounce of oil on the floor.
I presume I need to pull the carbs again No big deal, I have one needle valve leaking and over filling the carb anyway if it is sitting and not running, there are the 6 bolts, THEN WHAT?...
Thanks