Punkskalar
Hugh's HandBuilt
Still offering Crank and Cam Exchange services - AND now taking on a few select engine build ups - Take a look: http://www.hughshandbuilt.com/services/rephased-xs650-components/
Last edited:
I want a rephased crank and cam just the shipping thing is a barrier living here in aus..
What if I buy a crank and cam off ebay that is in the states and have them shipped to you for rephasing.. then shipping them out here? I dont know will try work something out.. Getting to the stage of being close to assembling my motor but Im thinking while I have the cases split I may as well make this thing crank! Any advice much appreciated, respect your knowledge in these issues..
.. Chris aka Robbo ..
My overseas customers do that quite frequently
Can you rephase the earlier cranks/cams?Iwould like to rephase my 72 XS2.Apparently you can use a later crank and cam tensioners[probably moe parts required].Is there a reason the early cranks can't be used or is it a matter of not much demand to develop the mod?
Yes, and I have actually found that there is no need to change out all the other parts to a 447 setup, you can keep your 256 Crank and Cam and all internals
HAY hUGH WATS UP! I just wanted to know if you regrid the cams when you rephase them? If not is there a good cam out there I'd like loppy idle and good power up to high way speeds not a full out flat track cam (I ride a light hard tail and most of the time its
55-80 mph high ways) I ride it about + 5000 miles a year)
We were looking through all of our invoices to prepare for tax season, and we've done a TOn of the 277 Rephasing for folks. Thanks so much for your continued support of the little guy
Thanks so much for your support this year folks - I have the best customers in the world -
Hugh
THANK YOU, for being one of the BEST suppliers I have ever gotten parts from (I have bought lots of parts over the years) I and THAT is why you have NO SHORTAGE of customers. KEEP IT UP and you will continue to have no shortage of business.
BTW, thanks for all the QUALITY parts you have supplied, some day I will save up the $$$ for a re-phase big bore motor from ya.
Does the rephase give any performance gains?
Next winter is my balls to the walls performance upgrades.
I want a rephased crank and cam just the shipping thing is a barrier living here in aus..
What if I buy a crank and cam off ebay that is in the states and have them shipped to you for rephasing.. then shipping them out here? I dont know will try work something out.. Getting to the stage of being close to assembling my motor but Im thinking while I have the cases split I may as well make this thing crank! Any advice much appreciated, respect your knowledge in these issues..
.. Chris aka Robbo ..
This is exactly what I did !! I don't think it really works out cheaper but definatly safer
As your not risking sending the heavy items long distance twice !!... Including new rods it cost me $1000...
but it does leave you with a crank and cam you could sell here to make some cash back .....
I just received mine today and I'm stoked with it.... Awesome work !!
Thanks so much Hugh much appreciated...
Now I just need to wait for the rest of my rebuild kit to arrive....