gordonscott engineering

[gordonscott]

Hey i know this might be a dumb question but I read the thread and I was curious... do your pipes come with flanges ready to mount?

Hi Rambo, Yes they do

 

[gordonscott]

2into1 pipe just made for Josh

 

[gordonscott]

2into1 under bike header just made for Mike

 

[gordonscott]

Congrats too Chris Bedwell for his "Best exhaust" win at the "Greaserama" show this year! p.s. love the paint on this scoot

 

[gordonscott]

 

[jim540]

Here is a picture of the drag pipes on my bike.

 

[jim540]

A more recent picture.

 

[Ghetto]

Looks good Jim. I want a set of these drags for sure.

 

[jim540]

Thanks Ghetto. They are sweet. I got them with the silencers and they sound great. Fit is superb also.

 

[gordonscott]

Thanks Jim for the post Here is a dyno run I found on youtube with my "chopper hi-pipes" My custom flanges are like my fingerprint, thats one reason I make them myself

 

[jim540]

Sweet! I had a hard time deciding between the drag pipes and the chopper high pipes. Both look and sound great. I do plan on wrapping my drag pipes with header wrap, just have not got around to it.

 

[gordonscott]

Finished pipes for our own "BigJimmy" Tucked in tight around downtube for use of forward controls and keep pipe away from foot, then come around to clear the 750 BIG bore kit he is using and finally come back in tight for leg clearence. Fishmouth turnouts at ends with bracket and mount welded in place to connect pipes together and keep them strait, thanks for the order Jimmy

 

[gordonscott]

Cafe upswept style, these come with welded on brackets for stock location mounts

 

[AussieHard]

Cafe upswept style, these come with welded on brackets for stock location mounts

What did you do to the yam logo on the side cover?

 

[BigJimmyW13]

Finished pipes for our own "BigJimmy" Tucked in tight around downtube for use of forward controls and keep pipe away from foot, then come around to clear the 750 BIG bore kit he is using and finally come back in tight for leg clearence. Fishmouth turnouts at ends with bracket and mount welded in place to connect pipes together and keep them strait, thanks for the order Jimmy

Yeah, what he said.... MINE

Thanks man. They look great!

 

[C-Los SD]

Cafe upswept style, these come with welded on brackets for stock location mounts

These are sweet! Can you still run passenger pegs? How much?

 

[gordonscott]

Hey C-Los, give me a shout! Gordonscottengineering@verizon.net

 

[gordonscott]

Hi Dale, I just sand it down with a belt sander, start off with heavy grit and work your way to fine when logo is gone. I finish them off with either a scotch brite pad or buff them with compounds depending on the finish I'm after.

 

[AussieHard]

There is enough material left in the wall thickness after? The logo is pretty deep.

 

[gordonscott]

Dale, Plenty of material left... http://www.650motorcycles.com/dial.html