There cracked. Looks like someone was messing with them prior to me buying the bikeWhat's wrong with the ones you have?
Do you think any carb body from a bs34 will work. I found one off a 250 Yamaha that use one of these carbs. You think I can switch out the carb bodies and make this work ??Save those bad ones and look for any bs34's, 1980 through 1983......don't limit yourself to 80 only. '80 and '81 will be drop ins......'82 and '83 will work if you swap the choke setup with your '80's. '81 through '83 have the plastic floats as opposed to the brass. Yeah, save yer parts and pieces.
I have no spares, just trying to help you with what you have.
I need more help. I mounted my cdi box in a bad spot and broke it My bike is a 1980. But I found a cdi box from a 1978 on eBay for cheap. Would this work ???Stick with the BS's from an XS60 only. been down "the looks like it should fit" carb blind ally before. Every other model will have subtle differences: differnt holes drilled, tapped, fuel routing, machining done that will drive you nuts.
. This is exactly what I broke on my 1980. The listing says it’s from a 1979. Do you think this work????The 1978 model didn't have a CDI box. The CDI ignition didn't start until the 1980 model.
My bad. I meant to say 1979 My bike is a 1980. Would this work ???The 1978 model didn't have a CDI box. The CDI ignition didn't start until the 1980 model.
It’s in a million pieces Will this replacement I found on eBay work?? Says it’s from a 1979. My bike is a 1980xs650Define "broke." If all you did was broke a mounting tab, you can figure a way to fix. Them boxes are rare and hard to come by at a reasonable price.
.... and it's a TCI box, not a CDI
And it looks exactly the same from what I broke.Define "broke." If all you did was broke a mounting tab, you can figure a way to fix. Them boxes are rare and hard to come by at a reasonable price.
.... and it's a TCI box, not a CDI