Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Enjoy XS650.com?Consider making a donation to help support the site. XS650.com receives a small share of sales from some links on this page, but direct donations have a much greater impact on keeping this site going.
The condenser is actually two condensers with a common case ground. Each of the two wires from the condenser(s) goes to one set of points and also one of the terminals on one of the coils. The other coil terminal goes to the red / white wire from the kill switch.
Sorry for being so dumb right now, so your are saying one physical "Condeser" is actually two condensers in one housing? And I run one physical condenser pack? I have two separate condenser packs/housings so I was trying to wire TWO physical condensers up so maybe I have an extra from somewhere? If so that makes everything crystal clear.
Sorry for being so dumb right now, so your are saying one physical "Condeser" is actually two condensers in one housing? And I run one physical condenser pack? I have two separate condenser packs/housings so I was trying to wire TWO physical condensers up so maybe I have an extra from somewhere? If so that makes everything crystal clear.
yes,yes on both counts, you have a extra condenser pack, to test if it is good check with a Ohm meter should start off high or low resistance (forget which way) and drop or rise as it charges
This is your condenser "pack". It is 2 separate condensers mounted end to end on one bracket. There should be 2 black wires coming off it, one from each end (or each condenser). Each wire (condenser) hooks to a different points set.
yeah i got two of em and was trying to wire them both up... that's my problem everything is clear now. Amazing what starting out on the right assumptions clears up. The diagrams in my book/internet we showing two condensers so thats what I was trying to do as I had somehow ended up with two.
Im in the same spot right now this is all you need to be running correct? I have my wiring set up like this but no power feeds into my system when i turn my key any clues?
This is your condenser "pack". It is 2 separate condensers mounted end to end on one bracket. There should be 2 black wires coming off it, one from each end (or each condenser). Each wire (condenser) hooks to a different points set.