Coil early failure - why?

Torchard

XS650 Addict
Messages
154
Reaction score
115
Points
43
Location
Victoria, BC
Hi. I have a Mike’s dual output coil, The high energy version. It’s got no more than 10 hours on it and according to the multimeter it’s dead on the secondary side. As far as I know I didn’t tested ungrounded. Any thoughts on a reason why it might have had such a short life? I ask because I don’t want to replace it and just have the next one fail in short order. I see that particular one is out of stock at the moment so I’m looking for an alternative. Thanks for the wisdom. (I know this is a common enough thread but I can’t find something that speaks specifically to what I’m asking here.)
 
One of these?
Coil - Ignition - 1.6 Ohm - Dual High Output - TCI ignition


Coil - Ignition - 1.6 Ohm - Dual High Output - TCI ignition
$41.97
Part # 17-6803


:sick:

:cautious:

:doh:

https://www.ebay.com/itm/1152979968...,osub=osub,crd=crd,segname=segname,chnl=mkcid
 
Some of the Mike'sXS coils have been notorious for shitting the bed.
The one's I pictured tended to fail when the primary terminals fell out of the body, happened to me (and others).
 
Back
Top