For Sale - Engine/Motor Parting - XS650-SG - Years 79-80 - 2F0-20XXXX

[taggat]

The PO said the motor ran but was tearing it down to do a big bore.
Well he tore it apart and never finished.
Prices are listed below do NOT include shipping;

$30 - Oil/Clutch Side Cover RS, one allen bolt at the oil filter is stripped will need to be drilled, otherwise good.
$40 - Valve Cover includes rocker arms etc, painted black.
$50 - Cases
$15 - Starter
$5 - Tappet Covers
$20 - Pistons
$15 - Sump plate and screen
$15 - Shift linkage
$15 - Kicker assembly, no kicker.

SOLD - Transmission Gears
SOLD - Crank with rods
SOLD - Cam
SOLD - Stator/Alt Side Cover LS, Painted black, no chain wear, with stator cover no shown
SOLD - Cam Chain Adjuster
SOLD - Head
SOLD - Mechanical advance rod etc.
SOLD - Kicker
SOLD - Starter gears
SOLD - Clutch Pack
SOLD - Jug

 

[taggat]

More Pictures.

 

[taggat]

And some more pictures.

 

[taggat]

And just one more.

Also have misc. nuts bolts, top and bottom case that is in rebuildable condition.

 

[xs650dreamer]

oil feed lines ?

 

[xs650dreamer]

40 bucks for whole trans ? what year

 

[taggat]

40 bucks for whole trans ? what year

Both rack of gears, shown in the 2nd pic, 55 shipped to you, includes insurance and tracking.
XS650-SG - Years 79-80 - 2F0-20XXXX

Dont have any spare oil lines, sorry im replacing mine and going to try an oil cooler setup.

 

[Norman1950]

How do the splines look on the shift shaft?

Thanks

 

[azman857]

The valve cover and head should stay together as they were machined together. Just like the cases.

 

[taggat]

How do the splines look on the shift shaft?

Thanks

They look good, no stupid overtightening or shearing going on there.

 

[taggat]

The valve cover and head should stay together as they were machined together. Just like the cases.

Yeah that would be ideal, some people just want one or the other.

 

[TwoJugs]

Yeah that would be ideal, some people just want one or the other.

You might get stuck with the other half if you sell one seperate. You should be able to get fair money if sold together and any buyer should want both if they know what they are buying.

 

[taggat]

Hey Twojugs, heres the close ups bud.

 

[4x4FAB]

$50 shipped for both side covers? 45013

 

[cbrrudy]

I am interested in your cylinder / jug. The bores seem to look OK? Any broken fins? If all is good I would like to purchase it. I live in Minneapolis. 55420

 

[Okie]

How much for the electric starter bendix gear and spring clip?

 

[modderman]

That's great!! what about Transmission Gears?

 

[taggat]

That's great!! what about Transmission Gears?

There shown in post 2, 3rd and 4th pictures, 40 bucks + the trip.

 

[Iowa Mark]

Do you have the cam chain adjuster still? Rod, spring, washers, threaded rod, lock nut and cover nut?
Thanks, Mark

 

[taggat]

Do you have the cam chain adjuster still? Rod, spring, washers, threaded rod, lock nut and cover nut?
Thanks, Mark

Unfortunately I only have the cover nut, lock nut, threaded rod and plate.