On the right and bottom of the picture are turn signal parts. The part with the arrow is unfamiliar to me.I'm in the middle of stripping my headlight down ready to be painted. I've found one of the grommet or damper inserts broken so will need to find a new one, can anyone tell me what the small tab is for?
The diagram I used is TX/XS. Same, same.my bike was manufactured mid 1974 so whether they were using tx parts up maybe?
Here's a better image of the assembly. That rubber grommet is part #3 in the diagram and PN 150-84153-00.
The diagram shows the tab orientation.
Ah, he's asking about the metal part.No that's one of the two small the wiring grommets.
Thanks so much but I'm in the UK, I'm thinking it might not take much to to make something that would work.I have that part if you are interested. There are two nearly identical versions, the only difference is the width of the square protrusion on the one side. What does your square measure out to be?