Help! Does this look right for Pamco timing? Pics.

[remainincognito]

I still have the problem with gas coming out right exhaust pipe a lot. I've gone through the carbs vm36 and no luck so now the timing. Does this look right as I had someone install the pamco. I do have spark on both sides.

Gas coming out right exhaust and pipe not geting as hot as the other. I put my hand over left carb it stall.....if i put my hand over the carb with gas out of exhaust it does nothing like it's not firing.

 

[pamcopete]

remain...,

Looks about right. I don't think your problem is ignition related. If the mixture is way too rich, it won't fire.

 

[ann0yed]

The installation looks right (I just installed a Pamco on my bike) but I can't tell what's going on in the flywheel photo. What rpm is that? Is it possible that there is weak compression in that cylinder that isn't firing?

-j

 

[remainincognito]

Compression is 145 and 143

 

[remainincognito]

Pamco

Was too rich. Found a 145 pilot on that carb and a 135 in the other. Switched pilots and guess what side wont fire? Don't know why the pilots are so big and different but will be getting some 22.5 and 25's to try. Thank you.