I purchased some bullet style LED turn signals for my XS650.
I replaced the stock yamaha flasher relay with a Grote Industries variable load
electronic led flasher.
http://grote.com/product.php?product_number=44891
It is a 3 prong setup with an external ground, which I connected to where
the coil attaches to the frame.
With a battery at 12.7v and over, I turn the ignition on, you can hear the
relay activate.
But none of my turn signals work...
Am I missing something here?
The only wiring that I am aware of regarding the lights is the ground for each
signal and the power lead for each signal.
Where am I going wrong? Any ideas?