Okay, I'll order the cover.
If it all goes pear-shaped, I'ma blame you lot...
If it all goes pear-shaped, I'ma blame you lot...
I have made some similar adapters and velocity stacks from hollow POM stock. Basically thick wall tubing with, say 60 mm OD, 30 mm ID.View attachment 258469
Filter Adapter V3 is just right and allows for plenty of adjustment of the position. Second one is printing now. Takes about 2.5 hours to print and a little work on the mini-lathe to trim the adhesion raft and flash.
It would be easier, and certainly faster, to just turn them out of suitable PVC or other plastic stock. I don't have anything with sufficient wall thickness on hand, nor do I know of a source for any that wouldn't have a 3 figure minimum order.I have made some similar adapters and velocity stacks from hollow POM stock. Basically thick wall tubing with, say 60 mm OD, 30 mm ID.
View attachment 258469
Filter Adapter V3 is just right and allows for plenty of adjustment of the position. Second one is printing now. Takes about 2.5 hours to print and a little work on the mini-lathe to trim the adhesion raft and flash.
Thanks for thinking of me, but the 650 side covers are a completely different style.DE, I just posted a CL ad for CX500 parts...on the classified Craigslist thread...should have found this 1st...