Thanks all for your willingness.
@Jim you also have a scope so if you agree you'll be the first beta-tester.
For now it's in production, once I get and test them, I'm going to go back to you...
Sleddog also knows a fair bit more than me about electronic ignitions. Since he's willing, I'd suggest he be the first beta tester.I also have an electronics background, a bench tester for stock tci modules. Wouldn't mind being involved.
You good with that @sleddog83 ?its up to you. So the job switches from Jim to Sleddog. Noted
Well yes and no. I shouldn't have offered my efforts without thinking this through a bit more. I actually have a lot on my plate at the moment. I would like to see this project work. And I am curious to put one on the bench and test it, but I can't give it my full attention right away. Thanks for the vote of confidence, but I think Jim is your guy.
Yeah I should have been clearer. I tried every combination I could think of... index, read, home... with and without the http. Just plain http://192.168.4.1 was the first address I tried. Nothing. The browser just times out and says the address cannot be reached.- No more "read" menu, only http://192.168.4.1
That's all stuff I'd have already done were I connected to a ms computer. It's connected to my phone because I can't seem to find my long USB extender cable.Open a MsDos window (Run > cmd) and type: ping 192.168.4.1
in the browser type http://192.168.4.1/ with http and with a final slash
Yes, every 5 sec.... still connected. I even opened settings periodically and verified it was still connected.Check twice it's still connected to "transmic_ign", check that the box is still in "Setup Mode" Led blinks once every 5 seconds
Ahhhh...... NOW ya tell me....No no no leave the USB disconnected ! it's there just in case ! Only use Wifi !!