Ok. So I followed the advice from the board and re-torqued my head. It runs great but I have oil seeping/streaming from my base gasket. I may have screwed up when I took the head nuts off because I took the opportunity to replace the old rubber washers with brass washers and also to replace the upper mount with a HHB unit. There was about a week between when I took the old washers out and re-torqued the head.
Am I screwed? I've already re-torqued the head big nuts to 30 ft lbs a second time.
This is after riding about four miles.
Am I screwed? I've already re-torqued the head big nuts to 30 ft lbs a second time.
This is after riding about four miles.