Hey all,
I have an '82 XS650, craigslist special. I don't know if they're original gauges for this bike or from another year.
I took off the gauge cluster to rewire the center turn signal indicator after doing a LED replacement for the break lights and turn signals, and replace the tachometer due to the needle breaking. .
I also installed new tach and speedometer cables from mike's due to the original ones being rusty and making noise.
After putting the gauge cluster back on with the new cable, the speedo is making a whining noise just free spinning the tire. Here's a video:
I tried taking the cable out on both ends and making sure it was seated properly, but its still making the noise.
I also have another speedometer but the trip lever is broken off on it, attached photo. Is this something that can be repaired?
I have an '82 XS650, craigslist special. I don't know if they're original gauges for this bike or from another year.
I took off the gauge cluster to rewire the center turn signal indicator after doing a LED replacement for the break lights and turn signals, and replace the tachometer due to the needle breaking. .
I also installed new tach and speedometer cables from mike's due to the original ones being rusty and making noise.
After putting the gauge cluster back on with the new cable, the speedo is making a whining noise just free spinning the tire. Here's a video:
I also have another speedometer but the trip lever is broken off on it, attached photo. Is this something that can be repaired?