Wiring HELP

[Burley]

Re-wiring my tx650 and have bought bar controls and ignition switch from a couple of different places, Mikesxs-Ebay etc. So most of my wires are different from the original wiring diagram how do i find what wires do what.

Posted via Mobile

 

[member3480]

Use a ohm meter and you can check what wires go to what.
EASYEST way to do it.
You will have to do both plugs so you know what wir does what. Its a bummer some switch i got also had different colors but worked when i pluged them together
Whats yor main issue?

 

[Burley]

Cheers, getting most done know. Question Re: lights, only running head and tail light, my head light has 5 wires red, blue, black and a grean, brown/white that look like they have never been used. My tail light only has 2 wires red, black, all the diagrams i have seen have 3 any thoughts.

Posted via Mobile

 

[member3480]

Rear is not a problem thats running light and stop light wire ground is mount
Front light has a lot of wires you are going to have to test them to see what is what. You may have high/low/ground/and if it has high light indacator and that would be the 4 wires