Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Enjoy XS650.com?Consider making a donation to help support the site. XS650.com receives a small share of sales from some links on this page, but direct donations have a much greater impact on keeping this site going.
Ok so I am looking to put a 73 set (19 front and 18 rear) on my 81, but the wheel set has no axles or spacers. So what parts do I need to make them work? The 81 has stock forks and swing arm.
The 73 used the bolt on brake rotors. The same as the rest of the 73 up bikes. On the rear if they both have the drum brake just use your axle and spacers. Same on the front.
Leo
Did my rear the same as you on my 81. I just simply used the 81;s spacers and spindle. I did do a swap with someone before and it was all wrong as I had the bits for the 73 and they were too short!!
Don't know about the front as I have USD's up front, had to get spacers made