Brake line question early caliper

[jkocr2]

Ok, I've searched high and low and have yet to find a definite answer. I want to do either a single line from the master to the caliper (early style) or if that's too much of a pain (adapters, etc...) then I would do a line from the master to the lower hard line.

My question is...
Is the top of the lower hard line just a standard fitting that would come on a universal goodridge line? I would only need the banjo fitting for the master?

Otherwise, does anyone know the exact fittings I would need to go all the way from the caliper to the master.

 

[5twins]

I would call 3M at 650Central. He sells the lines you need and would be able to tell you all that stuff.

 

[shawn00sa]

Like this?

http://www.xs650.com/forum/showpost.php?p=287697&postcount=10

http://www.xs650.com/forum/showpost.php?p=287893&postcount=12

 

[jd750ace]

That top looks like a standard 10MM banjo fitting. The only variation in 10 MM banjo bolts I've really seen is the Brembo stuff uses a 10MM X 1.0 thread instead of 10MM X 1.25, which is the norm. Goodridge should have a fitting that will work on the bottom as well.
This place does custom lines and comes highly recommended.
http://www.cyclebrakes.com/index.html

 

[jkocr2]

Yes! What fitting is that on the bottom?

 

[shawn00sa]

Yes! What fitting is that on the bottom?

AN-3.....

 

[shawn00sa]

Sorry guys I missed a few messages. We have these for available at work. We used these on an older model of MX bike we built. We build MX bikes for kids. http://www.cobramotorcycle.com/v3_default.asp

Just give us a call. Bill in parts can help you out. If he is clueless when you say XS650, just ask for Shawn.

517-437-9100

FYI...I have thse on my bike and they have worked awesome!