cmills83
XS650 Addict
I recently finished up a top end rebuild (pistons, valve guides, valves and new cam chain). Aside from a charging issue the bike runs good but after 50 miles I decided to do another valve adjustment.
I noticed the pin in the cam chain tensioner seems to come out pretty far but then it also goes in about that far. Is this something I need to address? For the most part it is even with the bolt. The valves aside from 1 still seemed in spec and the 1 wasn't that far off.
I noticed the pin in the cam chain tensioner seems to come out pretty far but then it also goes in about that far. Is this something I need to address? For the most part it is even with the bolt. The valves aside from 1 still seemed in spec and the 1 wasn't that far off.